Skip to content
TJM Home Improvements
Damp affected wall being prepared for damp proofing work

Damp Proofing - Kingston KT1

Damp Proofing in Kingston

Diagnosed at the cause, then dealt with in the right order. Covering Kingston and Surbiton, New Malden, Norbiton.

Ask about damp proofing in Kingston

Tell us what is happening and we will come and look.

The work

Damp Proofing for Kingston homes

Kingston is a short run for us, so a look at a damp proofing job here is a visit rather than a day of travel priced into the quote. We work across KT1 and out into Surbiton, New Malden, Norbiton, Hampton Wick.

Damp gets misdiagnosed constantly. A patch at skirting level is assumed to be rising damp when it is a leaking gutter soaking the wall from outside, or a raised path bridging the damp course, or a blocked airbrick. Injecting a wall that is being wetted from above achieves nothing.

So we look at the outside of the building first: roof, flashings, gutters, downpipes, pointing, ground levels and ventilation. Once the water is stopped, we treat the wall itself where a chemical damp course, re-plastering or a membrane is genuinely the answer.

Rising damp staining a rendered internal wall

What's included

What damp proofing covers

  • Diagnosis

    An inspection that covers the roof, roofline, pointing and ground levels, not just the wall.

  • Penetrating damp

    Defective pointing, render, flashings and gutters put right so the wall can dry.

  • Bridging and ground levels

    Raised paths, render skirts and debris that bridge the damp course dealt with.

  • Damp proof course

    A chemical damp course installed where the original has genuinely failed.

  • Re-plastering

    Salt-contaminated plaster hacked off and replaced with a suitable render and finish.

  • Condensation and ventilation

    Airbricks cleared and ventilation improved where the problem is condensation rather than damp.

The process

How a damp proofing job runs in Kingston

  1. Step 01

    Inspect inside and out

    The pattern of the damp, and the state of the outside of the building, tell us the cause.

  2. Step 02

    Report the cause

    A plain explanation of what is wetting the wall, with photographs.

  3. Step 03

    Stop the water

    Roof, gutter, pointing or ground-level work first, in the order that matters.

  4. Step 04

    Treat and finish

    Damp course, re-plastering or ventilation work once the source is dealt with.

Next step

Get a price for damp proofing in Kingston

Send the form or ring 020 3128 7540. We will come and look at what you actually have, then put a figure in writing.

Our work

Read the reviews, then look at the jobs

What customers have said about the work, collected from the places they left it.

Read customer feedback straight from our MyBuilder profile, where every review is tied to a job we were hired for, and see finished work on Instagram as it comes off the scaffold.

Why TJM

Why Kingston customers use us for this

  • We look for the cause instead of selling an injection as the default answer.
  • Being roofers, we can fix the gutter or the flashing that is causing it.
  • Nothing is treated before the water has been stopped.
  • You get an explanation of what is happening, not just a quote.
A damp tide mark along the bottom of a wall

The price

Damp Proofing costs

What damp proofing costs comes down to what you actually have, not a price list. Two jobs that sound identical can be an hour of work or a week of it, which is why we do not price roofing over the phone. We come and look, then put a figure in writing.

  • The cause, since a blocked gutter and a failed damp course are very different jobs.
  • The length of wall affected and whether plaster has to come off.
  • External work needed first: pointing, render, roofline or ground levels.
  • Access, particularly on a party wall or a basement.

On the job

Damp Proofing across Kingston

We cover Kingston KT1 and the streets around it - Surbiton, New Malden, Norbiton, Hampton Wick - so most damp proofing jobs here are a short journey rather than a day of travel priced into the quote.

If your job crosses into another trade, that is still one price and one person responsible for the order the work happens in. Roofing, brickwork, render and groundwork are all done in house.

  • We look for the cause instead of selling an injection as the default answer.
  • Being roofers, we can fix the gutter or the flashing that is causing it.
  • Nothing is treated before the water has been stopped.
Damp and mould at the base of an internal corner

Questions

Damp Proofing in Kingston: common questions

Still not sure? Ring and ask. It is usually quicker than typing it out, and you will speak to the person who would do the work.

Is my damp definitely rising damp?

Probably not. True rising damp is far less common than it is diagnosed. Penetrating damp from a roof, gutter or bridged wall, and condensation, account for most of what we get called to look at.

Do I need an injected damp course?

Only if the original damp proof course has genuinely failed and nothing else is wetting the wall. If a downpipe has been discharging into the brickwork for two years, fixing the downpipe is the damp proofing.

How long does a wall take to dry out?

Longer than most people expect. A saturated solid wall can take months to dry once the water is stopped, which is why re-plastering too early leaves you with the same stains again.

Do you charge to look at damp?

Ring us and we will tell you before we come out. What we will not do is offer a free survey that always concludes you need an injected damp course, because that is how a great deal of damp work gets mis-sold.

Is the work guaranteed?

Ask at the quote stage what cover applies to your job and we will set it out in writing rather than in conversation. It depends what the work actually is, because stopping a leaking gutter and installing a damp course are not the same thing.
Call nowGet a quote