Skip to content
TJM Home Improvements
A finished felt flat roof with a glass lantern rooflight set into it

Flat Roofs - Chiswick W4

Flat Roofs in Chiswick

Extensions, dormers, garages and outbuildings, re-covered to shed water. Covering Chiswick and Brentford, Acton, Kew.

Ask about flat roofs in Chiswick

Tell us what is happening and we will come and look.

The work

Flat Roofs for Chiswick homes

Chiswick is a short run for us, so a look at a flat roofs job here is a visit rather than a day of travel priced into the quote. We work across W4 and out into Brentford, Acton, Kew, Hammersmith, Richmond.

Almost every failed flat roof we look at has the same two problems: no fall, so water sits, and no insulation upgrade, so the deck stays cold and sweats. Ponding then finds the weakest lap, and the ceiling below tells you about it.

We rebuild flat roofs from the deck up. Firrings or a tapered scheme set the fall, insulation goes in to current standards where the build-up allows, and the covering is chosen to suit the roof: high-performance felt, EPDM rubber, or fibreglass where the detailing is complicated.

A flat roof membrane being torched down along a joint

What's included

What flat roofs covers

  • Strip and deck

    Old covering removed, deck inspected, and soft or delaminated boarding replaced.

  • Falls

    Firrings set so water actually runs to the outlet instead of sitting in the middle.

  • Insulation

    Upgraded within the build-up where head height and detailing allow.

  • The covering

    Torch-on felt, EPDM rubber or GRP fibreglass, matched to the roof and the budget.

  • Edges and outlets

    New trims, drips and outlets so the water leaves the roof cleanly.

  • Upstands and abutments

    Dressed and flashed where the flat roof meets a wall or a pitched roof.

The process

How a flat roofs job runs in Chiswick

  1. Step 01

    Get on the roof

    We check the deck by walking it and looking underneath, so the quote reflects the real condition.

  2. Step 02

    Recommend a system

    Felt, rubber or fibreglass, with the reason for the recommendation and the price of each.

  3. Step 03

    Strip and rebuild

    Deck sorted, falls formed, insulation and covering laid in one continuous run of work.

  4. Step 04

    Check and clear

    Outlets tested, trims finished, and the old covering taken away.

Next step

Get a price for flat roofs in Chiswick

Send the form or ring 020 3128 7578. We will come and look at what you actually have, then put a figure in writing.

Our work

Read the reviews, then look at the jobs

What customers have said about the work, collected from the places they left it.

Read customer feedback straight from our MyBuilder profile, where every review is tied to a job we were hired for, and see finished work on Instagram as it comes off the scaffold.

Why TJM

Why Chiswick customers use us for this

  • Falls are formed properly, which is what actually stops a flat roof failing.
  • Deck repairs are shown to you before they get covered up.
  • Three systems offered, so you are not sold whichever one we happen to prefer.
  • Extension and dormer roofs detailed into the main roof, not butted up against it.
A small flat roof over a rear extension

The price

Flat Roofs costs

What flat roofs costs comes down to what you actually have, not a price list. Two jobs that sound identical can be an hour of work or a week of it, which is why we do not price roofing over the phone. We come and look, then put a figure in writing.

  • Area, and how much of the deck needs replacing.
  • The covering: felt, EPDM and GRP each price differently.
  • Insulation thickness, and whether upstand heights allow it.
  • The number of upstands, outlets and abutments to detail.

On the job

Flat Roofs across Chiswick

We cover Chiswick W4 and the streets around it - Brentford, Acton, Kew, Hammersmith, Richmond - so most flat roofs jobs here are a short journey rather than a day of travel priced into the quote.

If your job crosses into another trade, that is still one price and one person responsible for the order the work happens in. Roofing, brickwork, render and groundwork are all done in house.

  • Falls are formed properly, which is what actually stops a flat roof failing.
  • Deck repairs are shown to you before they get covered up.
  • Three systems offered, so you are not sold whichever one we happen to prefer.
A new felt flat roof looking out over a West London back garden

Questions

Flat Roofs in Chiswick: common questions

Still not sure? Ring and ask. It is usually quicker than typing it out, and you will speak to the person who would do the work.

How long should a flat roof last?

A modern torch-on felt or EPDM roof laid with correct falls should be a twenty-year-plus covering. The ones that fail in five are almost always ponding, so the fall matters more than the brand of membrane.

Can you just patch it?

If the covering is otherwise sound and the fault is one lap or one outlet, yes, and we will say so. If the roof is ponding and blistered across the whole area, patching buys a season at best.

Which is better, rubber or felt?

EPDM rubber goes down in one sheet on a simple rectangle, which is a real advantage. Felt is easier to detail around awkward shapes and simple to repair later. We pick based on the shape of your roof.

How much fall does a flat roof need?

Current guidance is a finished fall of at least 1 in 80, which in practice means designing to 1 in 40 so deflection and workmanship do not eat it. A roof with no measurable fall is the commonest reason a flat roof fails early.

Can an existing flat roof be insulated?

Usually, and a re-cover is the moment to do it. The limit is upstand height: insulation raises the finished level, so door thresholds and abutment flashings still have to work afterwards. We check that before quoting.
Call nowGet a quote